SGG MIRALITE REVOLUTION is the new generation of environmentally friendly mirrors by Saint-Gobain Glass. It is a no lead added highly durable mirror. It is produced without cooper and it offers high performances while minimising the ecological footprint.

The mirror is created by depositing a layer of silver onto the glass, which is then treated, proceeded by two layers of high resistant protective paint. The innovative manufacturing process is more eco-friendly than ever and improves the overall durability and optical quality of the product.

Responsible production:

  • Reduction of atmospheric pollution
  • Reuse and recycling of 30% of the water used
  • Recycling of metal and glass scrap


Product Application

The properties of SGG MIRALITE REVOLUTION help enhance internal spaces (increased light levels, conviviality, ambience complemented by original designs…).

It is ideal for use in the home (bathrooms, hallways…) and in professional settings such as offices, businesses, hotels, restaurants, sports halls…

Available in different shapes to create new dimensions: framed or unframed mirror, wall cladding, item of furniture (table, cupboard door, shelf), signage...


  • A product which favours well-being and health, with no toxic substances.
  • Quality and durability remain unchanged, a performance which is the outcome of a major Research and Development programme.
  • Attractive appearance to create light and convivial living spaces.
  • The ecological footprint of SGG MIRALITE REVOLUTION has been reduced by working on every step of its life cycle.





For other dimensions, please contact us.


Manufacturing sizes

PLF: 3210 x 6000 mm
DLF: 3210 x 2000 / 2250 / 2440 / 2550 mm


Tolerance on thicknesses

2, 3, 4, 5 and 6 mm : +/- 0.2 mm
8mm : +/- 0.3 mm



Measurement of reflectance shall be undertaken in accordance with the principle of EN 410, but with the angle of incidence of the light within 8° of normal.



Channel glazing in a frame
Ensure that the frame is clean and dry. Position the mirror on blocks at least 3 mm thick, to raise the mirror and avoid any contact with condensation water that might collect in the frame.

Fixing pads
Provide suitable fixings.
Avoid contact between the glass and metal by using plastic spacers and washers. Attach the mirror without applying excessive pressure.

Adhesive fixing
Secure the SGG MIRALITE REVOLUTION using mirror adhesive or alcohol based or oxime-based neutral silicone only*, together with double-sided adhesive pads.
Follow the instructions of the adhesive manufacturer.

* If there is any doubt whether the products used are neutral, it is essential to carry out a test on the paint.


Exterior installation

Please contact Saint-Gobain Glass.



Do not use harsh products (acid solution, highly alkaline or very abrasive). Ensure that no residue from cleaning products is left around the edges.



SGG MIRALITE REVOLUTION must be installed in accordance with current regulations. It is often necessary to use a mirror with a safety film.


In all cases

Irrespective of how the mirror is attached, ensure the following:

  • Install the mirror on a supporting wall that is stable, clean and dry, free from harsh substances and absolutely flat
  • Provide sufficient space between the supporting wall and the mirror to ensure good ventilation (5 mm for a mirror less than 1 m tall, 10 mm for a larger mirror)
  • Leave a space of 1 to 2 mm between mirrors when they are installed side by side
  • Avoid placing the mirror near a source of heat (lighting, heating, etc.)

Processing Capabilities

Numerous edgeworking options

SGG MIRALITE REVOLUTION is suitable for cutting into all types of geometric or non-geometric shapes. It can be drilled and edgeworked (bevel, chamfer, etc.).

SGG MIRALITE REVOLUTION can be customised with a logo, a sandblasted design, or engraved on the face opposite the coating.

Find out more

Technical support

Questions are grouped by common theme , so select the area which you require

Related applications